To use the DH-1 Drain Kit to drain any COOLSHIRT, COOLVEST, Poncho or insulated hose, follow the steps below that apply:
1) Hang the COOLSHIRT, COOLVEST, or Poncho in an area where the water can freely drain.
2) Attach both of the C-FLM Female Connectors to the male connectors from your
COOLSHIRT, COOLVEST, or Poncho by simply inserting the male connector into the
female connector until you hear an audible click. The cooling garment will begin to drain immediately.
3) Connect the HM-2 Drain Hose to the flow side of the insulated hose by inserting the male connector end of the HM-2 into the female connector of the insulated hose until you hear an audible click.
4) Place the open end of the HM-2 Drain Hose in to a drain area. Turn on the pump to the cooling system to pump all the water out of the cooling system through the HM-2 Drain Hose.