The visually striking Arai GP-7 sets the standard for competition auto-racing helmets. Combining Arai's proprietary shell construction with a wider eyeport for improved visibility and all new ventilation, the GP-7 shares the same shell shape as the F1-grid's GP-7SRC ABP helmet. The all-new shell is stronger and more flexible then the outgoing GP-6 model, allowing for a softer, more comfortable EPS inner liner. Finally, the 7-hole vent scheme allows for unsurpassed ventilation. Pre-threaded M6-Insert (Hans anchors not included). Snell SA2020 and FIA8859-2015 homologated.
For XL size, please check Arai GP-6S Helmet
Proper helmet fit is vital to the performance of a helmet during an impact. For the helmet to perform properly during an impact, it must stay securely on the head. Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet.
A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to use.
THE HELMET SHOULD FIT AS SNUGLY AS POSSIBLE – IT WILL BREAK IN AS YOU WEAR IT.
